# Makefile.in generated by automake 1.11.6 from Makefile.am. # Makefile. Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE.

# $Id: Makefile.am 1104 2009-06-24 07:28:23Z jakob $

VPATH = ../../auditor am__make_dryrun = \

{ \
  am__dry=no; \
  case $$MAKEFLAGS in \
    *\\[\ \   ]*) \
      echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
        | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
    *) \
      for am__flg in $$MAKEFLAGS; do \
        case $$am__flg in \
          *=*|--*) ;; \
          *n*) am__dry=yes; break;; \
        esac; \
      done;; \
  esac; \
  test $$am__dry = yes; \
}

pkgdatadir = $(datadir)/opendnssec-auditor pkgincludedir = $(includedir)/opendnssec-auditor pkglibdir = $(libdir)/opendnssec-auditor pkglibexecdir = $(libexecdir)/opendnssec-auditor am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = . DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \

$(srcdir)/Makefile.in $(srcdir)/ods-auditor.1.in \
$(srcdir)/ods-auditor.in $(srcdir)/ods-kaspcheck.1.in \
$(srcdir)/ods-kaspcheck.in $(top_srcdir)/configure \
$(top_srcdir)/lib/kasp_auditor/commands.rb.in install-sh \
missing

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/acx_dnsruby.m4 \

$(top_srcdir)/m4/acx_prefixhack.m4 \
$(top_srcdir)/m4/acx_ruby_library.m4 \
$(top_srcdir)/m4/am_prog_ruby.m4 \
$(top_srcdir)/m4/opendnssec_common.m4 $(top_srcdir)/version.m4 \
$(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

$(ACLOCAL_M4)

am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \

configure.lineno config.status.lineno

mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = ods-auditor ods-auditor.1 ods-kaspcheck \

ods-kaspcheck.1 lib/kasp_auditor/commands.rb

CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \

  $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  *) f=$$p;; \
esac;

am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \

srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`

am__nobase_strip = \

for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"

am__nobase_list = $(am__nobase_strip_setup); \

for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  if (++n[$$2] == $(am__install_max)) \
    { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  END { for (dir in files) print dir, files[dir] }'

am__base_list = \

sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'

am__uninstall_files_from_dir = { \

test -z "$$files" \
  || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
       $(am__cd) "$$dir" && rm -f $$files; }; \
}

am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" SCRIPTS = $(bin_SCRIPTS) SOURCES = DIST_SOURCES = am__can_run_installinfo = \

case $$AM_UPDATE_INFO_DIR in \
  n|no|NO) false;; \
  *) (install-info --version) >/dev/null 2>&1;; \
esac

man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man1_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \

if test -d "$(distdir)"; then \
  find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
    && rm -rf "$(distdir)" \
    || { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi

DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \

| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'

distcleancheck_listfiles = find . -type f -print ACLOCAL = ${SHELL} /tmp/buildd/opendnssec-1.3.9/auditor/missing --run aclocal-1.11 AMTAR = $${TAR-tar} AUTOCONF = ${SHELL} /tmp/buildd/opendnssec-1.3.9/auditor/missing --run autoconf AUTOHEADER = ${SHELL} /tmp/buildd/opendnssec-1.3.9/auditor/missing --run autoheader AUTOMAKE = ${SHELL} /tmp/buildd/opendnssec-1.3.9/auditor/missing --run automake-1.11 AWK = mawk CUCUMBER = CYGPATH_W = echo DEFS = -DPACKAGE_NAME="opendnssec-auditor" -DPACKAGE_TARNAME="opendnssec-auditor" -DPACKAGE_VERSION="1.3.9" -DPACKAGE_STRING="opendnssec-auditor\ 1.3.9" -DPACKAGE_BUGREPORT="" -DPACKAGE_URL="" -DPACKAGE="opendnssec-auditor" -DVERSION="1.3.9" -DPACKAGE="opendnssec-auditor" -DVERSION="1.3.9" -DOPENDNSSEC_CONFIG_DIR="/etc/opendnssec" -DOPENDNSSEC_CONFIG_FILE="/etc/opendnssec/conf.xml" -DOPENDNSSEC_SCHEMA_DIR="/usr/share/opendnssec" -DOPENDNSSEC_STATE_DIR="/var/opendnssec" -DOPENDNSSEC_SIGNER_PIDFILE="/var/run/opendnssec/signerd.pid" -DOPENDNSSEC_ENFORCER_PIDFILE="/var/run/opendnssec/enforcerd.pid" -DOPENDNSSEC_FETCH_PIDFILE="/var/run/opendnssec/zone_fetcher.pid" -DOPENDNSSEC_SIGNER_SOCKET="/var/run/opendnssec/engine.sock" -DOPENDNSSEC_SIGNER_ENGINE="/usr/sbin/ods-signerd" -DOPENDNSSEC_SIGNER_CLI="/usr/sbin/ods-signer" -DODS_SE_PIDFILE="/var/run/opendnssec/signerd.pid" -DODS_ZF_PIDFILE="/var/run/opendnssec/zone_fetcher.pid" -DODS_SE_SOCKFILE="/var/run/opendnssec/engine.sock" -DODS_SE_WORKDIR="" -DODS_SE_CFGFILE="/etc/opendnssec/conf.xml" -DODS_SE_RNGDIR="/usr/share/opendnssec" -DODS_SE_ENGINE="/usr/sbin/ods-signerd" -DODS_SE_CLI="/usr/sbin/ods-signer" -DODS_SE_AUDITOR="/usr/bin/ods-auditor" -DODS_SE_MAXLINE=1024 -DODS_SE_MAX_BACKOFF=3600 -DODS_SE_WORKERTHREADS=4 -DODS_SE_STOP_RESPONSE="Engine\ shut\ down." -DODS_SE_FILE_MAGIC=";ODSSE2" -DODS_SE_FILE_MAGIC_V1=";ODSSE1" -DODS_AU_KASPCHECK="/usr/bin/ods-kaspcheck" -DODS_EN_CONTROL="/usr/sbin/ods-control\ enforcer\ " ECHO_C = ECHO_N = -n ECHO_T = GREP = /bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LIBOBJS = LIBS = LTLIBOBJS = MAKEINFO = ${SHELL} /tmp/buildd/opendnssec-1.3.9/auditor/missing --run makeinfo MKDIR_P = /bin/mkdir -p OPENDNSSEC_BIN_DIR = /usr/bin OPENDNSSEC_CONFIG_DIR = /etc/opendnssec OPENDNSSEC_CONFIG_FILE = /etc/opendnssec/conf.xml OPENDNSSEC_DATA_DIR = /usr/share/opendnssec OPENDNSSEC_ENFORCER_PIDFILE = /var/run/opendnssec/enforcerd.pid OPENDNSSEC_FETCH_PIDFILE = /var/run/opendnssec/zone_fetcher.pid OPENDNSSEC_LIBEXEC_DIR = /usr/lib/opendnssec/opendnssec OPENDNSSEC_LIB_DIR = /usr/lib/opendnssec OPENDNSSEC_LOCALSTATE_DIR = /var/opendnssec OPENDNSSEC_PID_DIR = /var/run/opendnssec OPENDNSSEC_SBIN_DIR = /usr/sbin OPENDNSSEC_SCHEMA_DIR = /usr/share/opendnssec OPENDNSSEC_SIGNER_CLI = /usr/sbin/ods-signer OPENDNSSEC_SIGNER_ENGINE = /usr/sbin/ods-signerd OPENDNSSEC_SIGNER_PIDFILE = /var/run/opendnssec/signerd.pid OPENDNSSEC_SIGNER_SOCKET = /var/run/opendnssec/engine.sock OPENDNSSEC_STATE_DIR = /var/opendnssec OPENDNSSEC_SYSCONF_DIR = /etc/opendnssec PACKAGE = opendnssec-auditor PACKAGE_BUGREPORT = PACKAGE_NAME = opendnssec-auditor PACKAGE_STRING = opendnssec-auditor 1.3.9 PACKAGE_TARNAME = opendnssec-auditor PACKAGE_URL = PACKAGE_VERSION = 1.3.9 PATH_SEPARATOR = : RUBY = /usr/bin/ruby1.8 SET_MAKE = SHELL = /bin/bash SORT = /usr/bin/sort STRIP = TIMESHIFT = false VERSION = 1.3.9 XMLLINT = /usr/bin/xmllint abs_builddir = /tmp/buildd/opendnssec-1.3.9/build-sqlite3/auditor abs_srcdir = /tmp/buildd/opendnssec-1.3.9/build-sqlite3/auditor/../../auditor abs_top_builddir = /tmp/buildd/opendnssec-1.3.9/build-sqlite3/auditor abs_top_srcdir = /tmp/buildd/opendnssec-1.3.9/build-sqlite3/auditor/../../auditor am__leading_dot = . am__tar = $${TAR-tar} chof - "$$tardir" am__untar = $${TAR-tar} xf - bindir = ${exec_prefix}/bin build_alias = x86_64-linux-gnu builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host_alias = htmldir = ${docdir} includedir = ${prefix}/include infodir = ${prefix}/share/info install_sh = ${SHELL} /tmp/buildd/opendnssec-1.3.9/auditor/install-sh libdir = ${exec_prefix}/lib libexecdir = /usr/lib/opendnssec localedir = ${datarootdir}/locale localstatedir = /var mandir = ${prefix}/share/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = ../../auditor sysconfdir = /etc target_alias = top_build_prefix = top_builddir = . top_srcdir = ../../auditor ACLOCAL_AMFLAGS = -I m4 RDOC = rdoc MAINTAINERCLEANFILES = \

config.log config.status \
$(srcdir)/Makefile.in \
$(srcdir)/config.h.in $(srcdir)/config.h.in~ \
$(srcdir)/configure \
$(srcdir)/install-sh $(srcdir)/ltmain.sh $(srcdir)/missing \
$(srcdir)/depcomp $(srcdir)/aclocal.m4 $(srcdir)/compile \
$(srcdir)/config.guess $(srcdir)/config.sub

opendnsseclibdir = $(libdir)/opendnssec bin_SCRIPTS = ods-auditor ods-kaspcheck man1_MANS = ods-auditor.1 ods-kaspcheck.1 EXTRA_DIST = $(srcdir)/lib/*.rb \

$(srcdir)/lib/kasp_auditor/*.rb \
$(srcdir)/sorttest.txt \
$(srcdir)/test_scripts/*.rb \
$(srcdir)/test/kaspcheck_bad/*.xml \
$(srcdir)/test/kaspcheck_good/*.xml \
$(srcdir)/test/signer_test_bad/*.xml \
$(srcdir)/test/signer_test_bad/*.partial \
$(srcdir)/test/signer_test_bad/signed_zones/*.nsec \
$(srcdir)/test/signer_test_bad/signed_zones/*.nsec3 \
$(srcdir)/test/signer_test_bad/zone_config/*.nsec \
$(srcdir)/test/signer_test_bad/zone_config/*.nsec3 \
$(srcdir)/test/signer_test_bad/zone_config/*.partial \
$(srcdir)/test/signer_test_good/*.xml \
$(srcdir)/test/signer_test_good/signed_zones/*.nsec \
$(srcdir)/test/signer_test_good/signed_zones/*.nsec3 \
$(srcdir)/test/signer_test_good/zone_config/*.nsec \
$(srcdir)/test/signer_test_good/zone_config/*nsec3 \
$(srcdir)/test/tmp/*.inbound \
$(srcdir)/test/tmp1/*.inbound \
$(srcdir)/test/tmp2/*.inbound \
$(srcdir)/test/tmp3/*.inbound \
$(srcdir)/test/tmp3/tracker/*.nl \
$(srcdir)/test/tmp3/tracker/*.config

all: all-am

.SUFFIXES: am--refresh: Makefile

@:

$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)

@for dep in $?; do \
  case '$(am__configure_deps)' in \
    *$$dep*) \
      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
        && exit 0; \
      exit 1;; \
  esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
  $(AUTOMAKE) --foreign Makefile

.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

@case '$?' in \
  *config.status*) \
    echo ' $(SHELL) ./config.status'; \
    $(SHELL) ./config.status;; \
  *) \
    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: $(am__configure_deps)

$(am__cd) $(srcdir) && $(AUTOCONF)

$(ACLOCAL_M4): $(am__aclocal_m4_deps)

$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

$(am__aclocal_m4_deps): ods-auditor: $(top_builddir)/config.status $(srcdir)/ods-auditor.in

cd $(top_builddir) && $(SHELL) ./config.status $@

ods-auditor.1: $(top_builddir)/config.status $(srcdir)/ods-auditor.1.in

cd $(top_builddir) && $(SHELL) ./config.status $@

ods-kaspcheck: $(top_builddir)/config.status $(srcdir)/ods-kaspcheck.in

cd $(top_builddir) && $(SHELL) ./config.status $@

ods-kaspcheck.1: $(top_builddir)/config.status $(srcdir)/ods-kaspcheck.1.in

cd $(top_builddir) && $(SHELL) ./config.status $@

lib/kasp_auditor/commands.rb: $(top_builddir)/config.status $(top_srcdir)/lib/kasp_auditor/commands.rb.in

cd $(top_builddir) && $(SHELL) ./config.status $@

install-binSCRIPTS: $(bin_SCRIPTS)

@$(NORMAL_INSTALL)
@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
if test -n "$$list"; then \
  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
fi; \
for p in $$list; do \
  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
    -e 'h;s|.*|.|' \
    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
      if (++n[d] == $(am__install_max)) { \
        print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
    else { print "f", d "/" $$4, $$1 } } \
  END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
     test -z "$$files" || { \
       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
     } \
; done

uninstall-binSCRIPTS:

@$(NORMAL_UNINSTALL)
@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
files=`for p in $$list; do echo "$$p"; done | \
       sed -e 's,.*/,,;$(transform)'`; \
dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)

install-man1: $(man1_MANS)

@$(NORMAL_INSTALL)
@list1='$(man1_MANS)'; \
list2=''; \
test -n "$(man1dir)" \
  && test -n "`echo $$list1$$list2`" \
  || exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done;  \
if test -n "$$list2"; then \
  for i in $$list2; do echo "$$i"; done \
    | sed -n '/\.1[a-z]*$$/p'; \
fi; \
} | while read p; do \
  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
  echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
  fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
  test -z "$$files" || { \
    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
done; }

uninstall-man1:

@$(NORMAL_UNINSTALL)
@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)

tags: TAGS TAGS:

ctags: CTAGS CTAGS:

distdir: $(DISTFILES)

@list='$(MANS)'; if test -n "$$list"; then \
  list=`for p in $$list; do \
    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
  if test -n "$$list" && \
    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
    echo "       typically \`make maintainer-clean' will remove them" >&2; \
    exit 1; \
  else :; fi; \
else :; fi
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
  dist_files=`for file in $$list; do echo $$file; done | \
  sed -e "s|^$$srcdirstrip/||;t" \
      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
  */*) $(MKDIR_P) `echo "$$dist_files" | \
                   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                   sort -u` ;; \
esac; \
for file in $$dist_files; do \
  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
  if test -d $$d/$$file; then \
    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
    if test -d "$(distdir)/$$file"; then \
      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
    fi; \
    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
    fi; \
    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
  else \
    test -f "$(distdir)/$$file" \
    || cp -p $$d/$$file "$(distdir)/$$file" \
    || exit 1; \
  fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
        -exec chmod u+rwx,go+rx {} \; -o \
  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"

dist-gzip: distdir

tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)

dist-bzip2: distdir

tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__remove_distdir)

dist-lzip: distdir

tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__remove_distdir)

dist-lzma: distdir

tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)

dist-xz: distdir

tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__remove_distdir)

dist-tarZ: distdir

tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)

dist-shar: distdir

shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)

dist-zip: distdir

-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)

dist dist-all: distdir

tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist

case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.lz*) \
  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
  unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod u+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
  && am__cwd=`pwd` \
  && $(am__cd) $(distdir)/_build \
  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
    $(DISTCHECK_CONFIGURE_FLAGS) \
  && $(MAKE) $(AM_MAKEFLAGS) \
  && $(MAKE) $(AM_MAKEFLAGS) dvi \
  && $(MAKE) $(AM_MAKEFLAGS) check \
  && $(MAKE) $(AM_MAKEFLAGS) install \
  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
        distuninstallcheck \
  && chmod -R a-w "$$dc_install_base" \
  && ({ \
       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
      } || { rm -rf "$$dc_destdir"; exit 1; }) \
  && rm -rf "$$dc_destdir" \
  && $(MAKE) $(AM_MAKEFLAGS) dist \
  && rm -rf $(DIST_ARCHIVES) \
  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
  && cd "$$am__cwd" \
  || exit 1
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'

distuninstallcheck:

@test -n '$(distuninstallcheck_dir)' || { \
  echo 'ERROR: trying to run $@ with an empty' \
       '$$(distuninstallcheck_dir)' >&2; \
  exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
  exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
   || { echo "ERROR: files left after uninstall:" ; \
        if test -n "$(DESTDIR)"; then \
          echo "  (check DESTDIR support)"; \
        fi ; \
        $(distuninstallcheck_listfiles) ; \
        exit 1; } >&2

distcleancheck: distclean

@if test '$(srcdir)' = . ; then \
  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
  exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
  || { echo "ERROR: files left in build directory after distclean:" ; \
       $(distcleancheck_listfiles) ; \
       exit 1; } >&2

check-am: all-am check: check-am all-am: Makefile $(SCRIPTS) $(MANS) installdirs:

for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done

install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am

install-am: all-am

@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am install-strip:

if test -z '$(STRIP)'; then \
  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
      install; \
else \
  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi

mostlyclean-generic:

clean-generic:

distclean-generic:

-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:

@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)

clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am

-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile

distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-man

@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am: install-binSCRIPTS

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am

-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-binSCRIPTS uninstall-man

uninstall-man: uninstall-man1

.MAKE: install-am install-data-am install-strip

.PHONY: all all-am am--refresh check check-am clean clean-generic dist \

dist-all dist-bzip2 dist-gzip dist-lzip dist-lzma dist-shar \
dist-tarZ dist-xz dist-zip distcheck distclean \
distclean-generic distcleancheck distdir distuninstallcheck \
dvi dvi-am html html-am info info-am install install-am \
install-binSCRIPTS install-data install-data-am \
install-data-hook install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-man1 install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am uninstall uninstall-am uninstall-binSCRIPTS \
uninstall-man uninstall-man1

install-data-hook:

${INSTALL} -d -m 755 ${DESTDIR}$(opendnsseclibdir)
${INSTALL} -d -m 755 ${DESTDIR}$(opendnsseclibdir)/kasp_auditor
${INSTALL_DATA} $(srcdir)/lib/*.rb ${DESTDIR}$(opendnsseclibdir)
${INSTALL_DATA} $(srcdir)/lib/kasp_auditor/*.rb ${DESTDIR}$(opendnsseclibdir)/kasp_auditor
${INSTALL_DATA} $(builddir)/lib/kasp_auditor/*.rb ${DESTDIR}$(opendnsseclibdir)/kasp_auditor

check: prepare-test

$(RUBY) -I $(srcdir)/lib -I $(builddir)/lib $(srcdir)/test_scripts/auditor_test.rb

prepare-test:

test -d test || (cd $(srcdir); \
find test -name .svn -prune -o -type f -print |\
        cpio -pmdu $(abs_builddir))

rdoc:

rm -fr $(builddir)/doc
$(RDOC) \
        --exclude ${srcdir}/test \
        --exclude ${builddir}/test \
        ${srcdir} ${builddir}

# Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT:

[Validate]

Generated with the Darkfish Rdoc Generator 2.